Reflectors and nets - for any application
3D RIP-STOP SILVER (210T)
The very durable, perfect lightbox material is also suitable as reflector, if the reflection can be very hard. The workhorse for effective light transport. Can be used in any daylight condition.
Colour: SILVER. The back is BLACK.
The rip-stop design of this material makes it highly resistant to tearing, even in very stormy weather. Note: Very strong reflection. Good for light transmission over long distances, e.g. to illuminate the trunk of a tree under an enormous treetop. The light fall-off is hard.
| Application area: | Reflector |
| Max. Width seamless: | 150cm/ 58“ |
| Fire Protection: | Do not use near fire or heat sources |
| Front Color: | SILVER |
| Color temperature: | Neutral |
| Character: | Very direct, but slight reduction of light |
| Structural change: | felt alive |
| Light output*: | large |
| Special feature: | The workhorse for effective light transport. Appropriate for all daylight. |
| Color back: | BLACK |
| Color temperature: | neutral |
| Character: | little reflection |
| Structural change: | no |
| Light output*: | low |
| Special feature: | Appropriate for all daylight or artificial cold light |
* Depending on the distance between the reflector and the model.
Law of physics: A reflector acts as an independent light source. The light decreases by square of the distance. (At twice the distance, the reflector illuminates about 4x the area – so the amount of light is divided by four.)